ULTRAFABRICS®

Brisa

The aesthetics and durability of UltraFabrics® brand products make them a brilliant leather alternative with superior quality. UltraFabrics® utilizes efficient manufacturing processes that are based on conservation of raw materials, toxic-free solutions, and minimal dependency on natural resources. As harmony with human and environmental integration is the nature of this brand, the breathability, PVC free, and the low VOC performance attributes of UltraFabrics® products ensure a sustainable presence within your inner and outer environment.

Dust Periodically

To remove dirt and grime.

Limit Direct Sunlight

If possible, avoid direct sunlight. Extended exposure to sunlight can fade the fabric.

Contain The Stain

Wipe immediately with a dry cloth, then lift most stains with an alcohol-based cleaner like Fantastik.

Disinfect

Disinfect using a 5:1 water/bleach solution.

*test in a non-visible spot first, avoid stitching.

DISINFECTING ULTRAFABRICS®

Cleaners and disinfectants recommended by the CDC to combat COVID-19 have also been tested on Ultrafabrics materials with no adverse effects when cleaning guidelines are followed as directed. Learn More

NORMAL CARE

One of the best ways to keep UltraFabrics® brand surfaces looking great is to properly maintain them by cleaning regularly to prevent excessive dirt from accumulating.

Below is a general outline to help you keep your quality UltraFabrics® brand products looking their best.

Following these guidelines will help to extend the life of the fabric.

1. Clean regularly with soap and water
2. Wipe up spills as soon as they occur
3. Lift most stains with an alcohol based cleaner like Fantastik
4. Disinfect using a 5:1 water/bleach solution
5. All cleaning solution residue should be thoroughly rinsed with water
6. Air Dry

BALLPOINT PEN REMOVAL INSTRUCTIONS

1. Wipe the stain off with ethanol (rubbing alcohol). [If this is unsuccessful, proceed to step 2]
2. Prepare a solution of 50% chlorinated bleach, 50% water
3. Place a thin tissue over the ink stain
4. Apply the chlorinated bleach solution. Be sure not to over saturate the tissue.
5. Cover tissue with polyethylene film (plastic wrap) to prevent chlorinated bleach solution from drying.
6. Check on stain repeatedly.
7. Do not leave the chlorinated bleach solution for more than one (1) hour.
8. When the stain looks almost gone, remove the tissue and rinse the stain with water.
9. To neutralize the bleached area, place a tissue on the bleached area and apply 15% hydrogen peroxide solution.
10. Leave on for thirty (30) minutes, and remove the tissue.
11. Remove the peroxide residue with water.
12. While the foregoing instructions have proven to work in many cases, especially in which ink stains are addressed immediately, not all ink stains can be removed in every situation.

Note: These are recommended or suggested methods of cleaning. Always try any cleaning method in a hidden area to convince yourself of the results. LIFEFORM® is not responsible for damage incurred while cleaning. Like any upholstery material, all leathers can fade to some degree if exposed to the sun or direct light. Protect your furniture from the sun and direct light.