MAINTENANCE INSTRUCTIONS

Casters, bases and arms can be wiped clean with a damp cloth. For extra shine, they may be polished with products specifically formulated for plastics, nylon and fiberglass.

CHAIR CONTROLS NEED LUBRICATING ONCE A YEAR:

KNEE TILT MECHANISM LUBRICATION DIAGRAM – CLICK HERE

Lubrication Locations Use Self Penetrating Oil. DO NOT use a SPRAY lubricant.

Clutch Plates: DO NOT Lubricate Clutch Plates, it will cause irreversible damage.

Cover the floor to protect it and lay the chair on the floor so the control is visible.

Wipe away any dust, dirt, or old lubricant.
DO NOT USE SOLVENT LUBRICANTS (such as WD-40) as they attract dust and dirt that builds up in the joints, causing excessive wear and noise.

NEVER LUBRICATE THE CLUTCH PLATES as this will cause the clutch plates to slip and cause irreversible damage to the clutch.

Apply self-penetrating oil or a silicon, lithium, or motorcycle chain lubricant to the springs and rivets attaching the inner and outer control structure, and any other parts making contact EXCEPT THE CLUTCH PLATES.

Wipe away any excess lubricant then turn the chair upright.